Alaska Cleaning and Sanitizing ServSafe Practice Test
Practice with real AK Cleaning & Sanitizing exam questions and detailed explanations. 1,000+ real questions across all 7 exam sections.
Questions
~10 scored questions on the exam
Passing Score
75% overall (60/80)%
Time Limit
2 hours for the full exam
Prerequisites
None — anyone can take the ServSafe Manager exam
What is the Cleaning and Sanitizing Test?
Cleaning and Sanitizing covers the procedures and standards for keeping food-contact surfaces, equipment, and facilities properly cleaned and sanitized. This includes chemical sanitizer concentrations, warewashing methods, and establishing effective cleaning schedules.
Covers proper cleaning and sanitizing procedures, chemical concentrations, and warewashing
Topic Breakdown
Cleaning vs. Sanitizing
~3 questions
- The difference between cleaning, sanitizing, and disinfecting
- When to clean and when to sanitize
- Steps for proper cleaning and sanitizing procedure
Sanitizer Types & Concentrations
~3 questions
- Chlorine, quaternary ammonium (quat), and iodine sanitizers
- Proper concentration levels and testing procedures
- Water temperature and contact time requirements
Warewashing
~2 questions
- Three-compartment sink procedures (wash, rinse, sanitize)
- Dishwasher temperature and chemical requirements
- Air-drying requirements and proper storage
Cleaning Schedules & Programs
~2 questions
- Creating and maintaining master cleaning schedules
- Cleaning frequency for different areas and equipment
- Training staff on proper cleaning procedures
Free Practice Questions
10 questionsQuestion 1 of 10
When using chlorine as a chemical sanitizer, what is the correct concentration and water temperature?
Browse Alaska Cleaning & Sanitizing Questions
- 1. When using chlorine as a chemical sanitizer, what is the correct concentration and water temperature?
- 2. Which surfaces are considered non-food-contact surfaces that need regular cleaning?
- 3. What is the correct chlorine concentration for a chemical sanitizing dishwasher?
- 4. Equipment surfaces have been in continuous use for 5 hours at a busy restaurant. According to ServSafe guidelines, what should be done?
- 5. A school cafeteria worker discovers that the sanitizer concentration has dropped below the required level. What should be done?
- 6. What is the correct order of steps when manually cleaning and sanitizing equipment?
- 7. What information should be included in a master cleaning schedule?
- 8. What is the fundamental difference between cleaning and sanitizing?
- 9. When cleaning stationary equipment like a slicer, what is the first step?
- 10. Where should cleaning chemicals be stored in relation to food?
Study Tips for Alaska
- 1Memorize sanitizer concentrations: chlorine (50-99 ppm), quat (per manufacturer), iodine (12.5-25 ppm)
- 2Know the steps for cleaning and sanitizing: scrape, wash, rinse, sanitize, air dry
- 3Understand three-compartment sink setup and proper water temperatures
- 4Learn when food-contact surfaces must be cleaned and sanitized (every 4 hours, between tasks, after contamination)
- 5Review dishwasher requirements for both high-temperature and chemical sanitizing machines
Alaska Food Safety Information
Manager Cert Required
Yes
Handler Cert Required
Yes
Certification Renewal
Every 5 years
Alaska Department of Environmental Conservation
Official Food Safety Portal →Career Opportunities
Frequently Asked Questions
Cleaning removes visible food and dirt from surfaces using soap/detergent and water. Sanitizing reduces pathogens on clean surfaces to safe levels using heat or chemical solutions. Both steps are required — you must clean before sanitizing.
Don't Guess on Your Alaska Cleaning & Sanitizing Test
Real questions. Detailed explanations. Pass on your first try.